SYSTEM REFERENCE DOCUMENT 3.5

To calculate the Challenge Rating of a trap, add all the CR modifiers (see the tables below) to the base CR for the trap type.

Mechanical Trap: The base CR for a mechanical trap is 0. If your final CR is 0 or lower, add features until you get a CR of 1 or higher.

Magic Trap: For a spell trap or magic device trap, the base CR is 1. The highest-level spell used modifies the CR (see Table: CR Modifiers for Magic Traps).

Average Damage: If a trap (either mechanical or magic) does hit point damage, calculate the average damage for a successful hit and round that value to the nearest multiple of 7. Use this value to adjust the Challenge Rating of the trap, as indicated on the tables below. Damage from poisons and pit spikes does not count toward this value, but damage from a high strength rating and extra damage from multiple attacks does.

For a magic trap, only one modifier applies to the CR—either the level of the highest-level spell used in the trap, or the average damage figure, whichever is larger.

Multiple Traps: If a trap is really two or more connected traps that affect approximately the same area, determine the CR of each one separately.

Multiple Dependent Traps: If one trap depends on the success of the other (that is, you can avoid the second trap altogether by not falling victim to the first), they must be treated as separate traps.

Multiple Independent Traps: If two or more traps act independently (that is, none depends on the success of another to activate), use their CRs to determine their combined Encounter Level as though they were monsters. The resulting Encounter Level is the CR for the combined traps.

	Return to Index